Stud Wall Calculator — Timber Frame Estimator
Wall structure with studwork and 600 mm CC is pre-selected. Adjust dimensions, spacing, and openings to match your build.
Prisestimat bruker regionale snitt når nok brukere har delt priser (min. 5 per materiale).
Openings (doors & windows)
No openings — net area equals gross area.
Materials
Materialpriser (valgfritt)
Snittpriser 2026 · Klikk «Endre» for å overstyre
📋 Prosjektestimat
Stud wall calculator
Antall konstruksjoner: 1
Estimert total kostnad
NOK 0 – NOK 0
Intervall ±10 % på summerte linjer.
📄 Eksporter estimat som PDF
Få et ryddig tilbudsunderlag med mengdeliste og kostnader.
Oppgrader til Creator →🧱 Wall (20.00 m × 2.20 m × 0.20 m)
Netto areal: 44.00 m²
Volum: 8.80 m³
| Materiale | Mengde | Enhet | Kostnad |
|---|---|---|---|
| Studs (Stender) — 34 × 2.20m | 74.80 | m | NOK 0.00 |
| Corner posts (Hjørnestolpe) — 4 × 2.20m | 8.80 | m | NOK 0.00 |
| Bottom plate (Bunnsvill) — 1 × 20.00m | 20.00 | m | NOK 0.00 |
| Top plate (Toppsvill, double) — 2 × 20.00m | 40.00 | m | NOK 0.00 |
| Timber framing (incl. 10% wastage) | 158 | m | NOK 0.00 |
Delsum: NOK 0.00
Slik regnet vi
Gross wall face area: 20.00 m × 2.20 m = 44.00 m².
Net face area: 44.00 m².
Wall volume (net area × thickness): 44.00 m² × 0.20 m = 8.80 m³.
Timber frame (48×98mm, CC 600mm): wall run 20.00 m, height 2.20 m.
34 studs × 2.20m = 74.8m — 33 bays at 600mm + 1 end stud (minimum 2).
4 corner posts (2 per corner × 2 corners) × 2.20m = 8.8m.
Bottom plate: 20.00m. Double top plate: 2 × 20.00m = 40.0m.
Sum before waste: 143.6m → +10% → 158m (rounded up). Standard stock lengths (e.g. 3.0–6.0m) — order list from your supplier.
Totalt (mengder)
- Studs (Stender) — 34 × 2.20m: 74.80
- Corner posts (Hjørnestolpe) — 4 × 2.20m: 8.80
- Bottom plate (Bunnsvill) — 1 × 20.00m: 20.00
- Top plate (Toppsvill, double) — 2 × 20.00m: 40.00
- Timber framing (incl. 10% wastage): 158
Estimert totalsum: NOK 0.00
* Mengder inkluderer standard svinn der det er angitt: tegl +10 %, flis tak/gulv +10–15 %, membran +15 % overlapp. Andre materialer følger grunnberegning — legg til egen margin ved innkjøp.
📊 Hjelp andre byggere — del prisene du fikk
Dine innsendte priser er anonyme og hjelper andre nordmenn beregne riktig.
What this tool does
Stud Wall Calculator — Timber Frame Estimator helps you get to a clean result quickly without extra setup. It is designed for practical workflows where you need a reliable output you can copy, download, or reuse immediately. ConvertPal runs core transformations with clear labels and predictable defaults, and pairs the tool with short best-practice guidance so you can avoid common mistakes. If you are comparing options, start with the primary use case below, then follow the recommended next steps to keep the workflow consistent across your site. For advanced needs, combine this page with related tools to validate inputs, generate supporting copy, or standardize naming.
Wall structure with studwork and 600 mm CC is pre-selected. Adjust dimensions, spacing, and openings to match your build.
Common use cases
- Turn sketch dimensions into an order-of-magnitude materials list before you call a ready-mix plant or builder’s merchant.
- Compare two schemes (thick wall vs thin wall, different roof pitches) by duplicating structures side by side.
- Export a PDF quote draft when you are on a paid plan and need a shareable paper trail.
Recommended next steps
Quick FAQ
What does this stud wall calculator estimate?
With timber frame (studwork) pre-selected and 600 mm centre-to-centre spacing, it tallies studs, plates, and related timber lines in running meters including a standard wastage allowance.
Can I change stud spacing or timber size?
Yes. Use the stud spacing and timber dimension controls in the materials section to match your specification.
Are openings included?
The default wall has no openings for a quick tally; add doors and windows in the estimator to account for extra studs and headers.
Key benefits
- Estimate ready-mix, cement, sand, and gravel from wall and slab volumes.
- Quantify bricks, tiles, screed, insulation, and membrane from dimensions you already know.
- Turn supplier unit prices into an on-page quote range you can sanity-check in minutes.
What this tool does
All geometry is converted to metric meters internally, then standard rules of thumb turn volumes and areas into material quantities (for example cement bags per m³ of concrete, tiles per m², and common wastage factors). Related utilities on ConvertPal include Concrete Volume Calculator, Room Area Calculator, and Cubic Meter Converter.
Openings subtract from wall face area before volume is calculated, so window and door deductions behave like a simple quantity survey worksheet.
Nothing is sent to a server for the math: your dimensions, selections, and optional prices can be remembered locally in your browser so refreshes are less painful on long estimates.
How to use it
- Choose metric or imperial display, your currency, and optionally name the project.
- Add structures (walls, slabs, roofs, or custom area/volume) and enter dimensions.
- Select materials, optionally type supplier prices, and read quantities, line costs, and the expandable calculation notes.
- On Creator (paid), export a branded PDF or CSV for sharing with clients or your purchasing team.
More context
Pair this page with the concrete volume and room area calculators when you are jumping between slab pours and fit-out quantities.
If you need drawing-scale fidelity, start from the scale calculator or CAD exports in the Architect Tools hub, then bring final dimensions here for procurement math.
FAQ
Related tools
Keep momentum: each card is a practical next step in your workflow, not a random link.
Explore more tools
Browse category hubs and the full tool directory—structured internal links support crawl paths and topical relevance.
AI tools
Generators and enhancers for prompts, copy, and images.
Architect tools
Scale, dimensions, drawings, and site-friendly calculators.
Text tools
Counters, cleaners, formatters, and writing utilities.
All tools directory
Search every live utility in one place.
This page sits in Architect Tools. Use the related tools above when your next step is a different file type or workflow.
Clear headings, FAQs, and internal links help both readers and search engines understand how this page fits with construction material calculator, concrete estimator, brick calculator.