Parkett Kalkulator — Beregn antall planker
Gulv med parkett er forhåndsvalgt. Legg inn romlengde og -bredde, juster plankemål og leggemønster for mengde og esker.
Prisestimat bruker regionale snitt når nok brukere har delt priser (min. 5 per materiale).
Materials
Parquet / laminate flooring
Wastage by laying direction: lengthwise +8%, crosswise +10%, diagonal +15%.
Common sizes (mm)
Parquet presets (dimensions only)
Names are common retail plank sizes only — not an endorsement.
Laying direction
Materialpriser (valgfritt)
Snittpriser 2026 · Klikk «Endre» for å overstyre
📋 Prosjektestimat
Parkett calculator
Antall konstruksjoner: 1
Estimert total kostnad
NOK 0 – NOK 0
Intervall ±10 % på summerte linjer.
📄 Eksporter estimat som PDF
Få et ryddig tilbudsunderlag med mengdeliste og kostnader.
Oppgrader til Creator →🏗️ Floor (6.00 m × 4.00 m × 0.15 m)
Volum: 3.60 m³
| Materiale | Mengde | Enhet | Kostnad |
|---|---|---|---|
| Parquet / hardwood — floor planks | 108 | planks | NOK 0.00 |
| Boxes (8 planks/box) | 14.00 | boxes | NOK 0.00 |
| Underlay (~15m²/roll) | 2.00 | rolls | NOK 0.00 |
Delsum: NOK 0.00
Slik regnet vi
Slab area: 6.00 m × 4.00 m = 24.00 m².
Slab volume: 24.00 m² × 0.15 m = 3.60 m³.
24.00 m² floor area. Plank size: 120×2000mm = 0.240m² per plank (lengthwise (+8% waste)).
Base planks: 24.0 ÷ 0.240 → 100 planks → × 1.08 → 108 planks.
108 planks cover ~25.9m² (floor 24.0m² + 8% waste — lengthwise (+8% waste)).
Boxes: 108 ÷ 8 → 14 boxes (rounded up).
Underlay: 24.0m² + 5% overlap → 25.2m² → 2 rolls (15m² each, rounded up).
Totalt (mengder)
- Parquet / hardwood — floor planks: 108
- Boxes (8 planks/box): 14.00
- Underlay (~15m²/roll): 2.00
Estimert totalsum: NOK 0.00
* Mengder inkluderer standard svinn der det er angitt: tegl +10 %, flis tak/gulv +10–15 %, membran +15 % overlapp. Andre materialer følger grunnberegning — legg til egen margin ved innkjøp.
📊 Hjelp andre byggere — del prisene du fikk
Dine innsendte priser er anonyme og hjelper andre nordmenn beregne riktig.
What this tool does
Parkett Kalkulator — Beregn antall planker helps you get to a clean result quickly without extra setup. It is designed for practical workflows where you need a reliable output you can copy, download, or reuse immediately. ConvertPal runs core transformations with clear labels and predictable defaults, and pairs the tool with short best-practice guidance so you can avoid common mistakes. If you are comparing options, start with the primary use case below, then follow the recommended next steps to keep the workflow consistent across your site. For advanced needs, combine this page with related tools to validate inputs, generate supporting copy, or standardize naming.
Gulv med parkett er forhåndsvalgt. Legg inn romlengde og -bredde, juster plankemål og leggemønster for mengde og esker.
Common use cases
- Turn sketch dimensions into an order-of-magnitude materials list before you call a ready-mix plant or builder’s merchant.
- Compare two schemes (thick wall vs thin wall, different roof pitches) by duplicating structures side by side.
- Export a PDF quote draft when you are on a paid plan and need a shareable paper trail.
Recommended next steps
Quick FAQ
Hva beregner parkett-kalkulatoren?
Gulvflate er forhåndsvalgt med parkett. Du får anslag på planker, esker, underlag og valgfritt fotlister ut fra rommål, plankemål, leggemønster og svinn.
Hvor presise er tallene?
Dette er et planleggingsanslag ut fra rommål, plankemål og valgt svinnprosent. Mønster, kutt og leverandørbetingelser kan endre behovet — kryssjekk før du bestiller.
Kan jeg endre plankemål og eske?
Ja. Velg bredde, lengde, antall planker per eske, leggretning og om fotlister skal tas med.
Key benefits
- Estimate ready-mix, cement, sand, and gravel from wall and slab volumes.
- Quantify bricks, tiles, screed, insulation, and membrane from dimensions you already know.
- Turn supplier unit prices into an on-page quote range you can sanity-check in minutes.
What this tool does
All geometry is converted to metric meters internally, then standard rules of thumb turn volumes and areas into material quantities (for example cement bags per m³ of concrete, tiles per m², and common wastage factors). Related utilities on ConvertPal include Concrete Volume Calculator, Room Area Calculator, and Cubic Meter Converter.
Openings subtract from wall face area before volume is calculated, so window and door deductions behave like a simple quantity survey worksheet.
Nothing is sent to a server for the math: your dimensions, selections, and optional prices can be remembered locally in your browser so refreshes are less painful on long estimates.
How to use it
- Choose metric or imperial display, your currency, and optionally name the project.
- Add structures (walls, slabs, roofs, or custom area/volume) and enter dimensions.
- Select materials, optionally type supplier prices, and read quantities, line costs, and the expandable calculation notes.
- On Creator (paid), export a branded PDF or CSV for sharing with clients or your purchasing team.
More context
Pair this page with the concrete volume and room area calculators when you are jumping between slab pours and fit-out quantities.
If you need drawing-scale fidelity, start from the scale calculator or CAD exports in the Architect Tools hub, then bring final dimensions here for procurement math.
FAQ
Related tools
Keep momentum: each card is a practical next step in your workflow, not a random link.
Explore more tools
Browse category hubs and the full tool directory—structured internal links support crawl paths and topical relevance.
AI tools
Generators and enhancers for prompts, copy, and images.
Architect tools
Scale, dimensions, drawings, and site-friendly calculators.
Text tools
Counters, cleaners, formatters, and writing utilities.
All tools directory
Search every live utility in one place.
This page sits in Architect Tools. Use the related tools above when your next step is a different file type or workflow.
Clear headings, FAQs, and internal links help both readers and search engines understand how this page fits with construction material calculator, concrete estimator, brick calculator.